Garage floor concrete in Glendale CA - a new floor that cures well and cracks less
Cracked, sunken or dusty garage floor? We take it out, prep the ground and pour a new slab with joints placed where they belong.
- Fully licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
What does it take to replace a garage floor in Glendale?
Garage floor concrete is a new slab poured and finished inside your garage. For Glendale homes, that means a flat, solid floor you can park on and work on, built with a plan for the way fresh concrete shrinks as it cures.
Usually you're looking at a floor that's cracked, sunk at one corner or turning to dust, and you want to know what it takes to start over. The price mostly comes down to the size of the garage, whether we're breaking out an old slab, how much work the ground underneath needs and how easy it is to get concrete into the garage. The schedule turns on permits if the job needs one, the weather on pour day and the curing time before you park on it again. I'll put all of that in a written estimate that spells out what's included once I've seen the floor.
How can you tell your garage floor needs replacing?
Cracks across the floor
Cracks that wander across the slab, or widen and lift at the edges, usually mean the floor is moving with the ground under it or never had joints where it needed them. Left alone, they let water and oil soak in, the edges chip and the ground underneath keeps washing out.
A sunken corner or low spot
If water pools in one spot or a section sits lower than the rest, the base under that part has usually settled because it was raked level instead of dug out and packed. It tends to keep dropping, and the longer it goes, the more the slab around it cracks.
Dust and flaking on top
A floor that sheds gray dust or flakes when you sweep it often has a weak top layer, which tends to come from a pour in midday heat or curing that started too late. It keeps wearing down, and paint or coatings won't hold on it.
What our garage floor concrete work includes
A garage floor usually fails from underneath, so I start by working out why the old one cracked or sank before we break it out. Then we dig down to the subgrade, the dirt the slab sits on, pack a solid base, check that the floor slopes toward the garage door and not back toward the house, and set the forms. New concrete shrinks a bit as it cures, so I plan the control joints, the cuts that give a crack a straight place to go, before the pour and show you where they'll land. We pour, finish the surface, cut the joints on time and start curing right away, because that's the wait that lets the concrete harden all the way through instead of drying out on top. If the budget's tight, I'd rather spend it on the base than on a fancier finish, since nobody sees the base on day one but a nice top on loose dirt won't stay nice.
A garage floor often ties into the work around it. If the walk or patio outside the garage door should look like more than plain gray, our decorative concrete work adds color and pattern to it. When the garage backs into a slope that sheds dirt and water toward the slab, a concrete retaining wall is usually part of keeping the new floor dry.
Get a free written estimate for your garage floor
Send the form with your garage size in square feet and a photo of the floor. We reply within one business day, then I come out to look and give you a free written estimate, with no obligation.
- team@glendaleconcretecompany.com
- Based in
- Glendale, CA 91205
- Hours
- Mon–Sun: 6 AM–11 PM
What happens when you call about a garage floor in Glendale?
Here's how a garage floor job runs with us, from your first call to the day we walk the finished floor with you.
Call or send the form
Call (747) 372-8605 or send the form with your garage size and a photo of the floor. We set up a time for me to come out.
I come look at the floor
I check the cracks, the low spots and where the water runs, and ask how you use the garage. You get a written estimate that spells out what's included, so you can compare it line for line before you decide.
We prep, pour and finish
Once you say go, we take care of any permits the job needs, prep the ground, then pour and finish the floor. Curing starts the same day.
We walk the floor together
When we're done, we walk the job with you and go over how to treat the floor while it cures. We'll tell you when it's ready for a sealer, which comes later as its own step.
Why Glendale homeowners call Masterwork Glendale Concrete Company for garage floors
I look at your garage myself
We're based in Glendale, and I come out myself to look at the floor and write the estimate. Our own crew does the work with me running it, so the person who heard what you wanted is there the day we pour.
Running our own crew since 2020
I started the company in 2020 after years as the right-hand person to another concrete contractor, learning forming and finishing before I ran jobs. We get called most for the floors and walls with a puzzle in them, so we look for the cause before we pour.
Fully licensed and insured contractor
We're fully licensed and insured, and I'm glad to show you both when I come out for the estimate. That way you know who's responsible on your property before any concrete shows up.
On a garage floor, what counts most is the part you won't see once it's poured, the ground under it and where the joints go. Tell us about your garage and I'll come take a look.
Garage floors and the work around them in Glendale
The City of Glendale's Development Services Division takes building projects in the city, and every city application goes through its online permit portal. Whether a garage floor on its own needs a permit is a question for the city, not something to guess at, so if we're not sure, we check with that office before we start. When a job does need one, we pull it and line up the inspections as part of the work. Projects filed in Glendale now follow the state building code plus the city's own amendments, so local rules count as much as state ones.
A lot of the garages we see are older, with floors that went down on raked dirt or a driveway that runs water back under the door, so I look at where the water comes from before we price anything. We see the same thing on jobs in Burbank and Arcadia, and we work all over Glendale and the cities around it.
Questions about garage floor concrete in Glendale
How much does a new concrete garage floor cost around Glendale?
A new concrete slab in the Los Angeles area usually costs about $5 to $18 per square foot, and that's the going rate in the area, not our price. Where your floor lands depends on things like tearing out the old slab, how much base work the ground needs and how easy it is to get concrete to the garage. I'll give you a written figure once I've seen it.
What causes new concrete garage floors to crack?
New concrete shrinks as soon as it's placed, and that movement has to go somewhere, so every slab needs a plan for it. How far apart the joints sit is one of the main things that decides how much random cracking you get and what it looks like, so ask any contractor how they'll space them. Fine surface cracks that show up early are mostly about looks and rarely weaken the floor.
When can I seal a new concrete garage floor?
Wait at least 28 days after the pour. One concrete supplier's guide says to seal only after the concrete has had time to cure, a minimum of 28 days after it's placed, so plan the sealer as a separate step rather than something done on pour day.
What time of day should concrete be poured in hot weather?
Early morning, whenever possible. A concrete association's hot weather guide advises getting the concrete delivered, placed and finished promptly, with early morning pours whenever you can, so on a hot day expect a crew that wants an early start and no delays.
What is the best way to cure a new concrete garage floor?
The same guide says to begin curing immediately after the pour and lists these ways to do it: a curing compound, seven days of steady soaking, a cover of wet burlap or plastic sheeting, or curing paper. Ask which one your crew plans to use, since the top of the slab is the part you'll drive and work on.
Who can legally pour my garage floor in California?
A licensed contractor, in most cases. California's Contractors State License Board has a concrete contractor classification, and a general building contractor can take on the concrete if it holds that specialty or hires a licensed concrete contractor, so it's fair to ask which way they'll do it. Unlicensed work is allowed only under $1,000, and only when the job needs no permit and the person has no employees on it.
Related concrete work for your garage
Decorative concrete
If plain gray isn't what you want under your car or workbench, decorative concrete adds color and texture to a slab while keeping it hard-wearing.
See the service Decorative concreteConcrete retaining walls
When a garage or driveway is cut into a slope, a concrete retaining wall keeps the hillside from pushing against the slab or washing dirt onto it.
See the service Concrete retaining walls
Service areas for garage floor concrete
Masterwork Glendale Concrete Company is based in Glendale, California, and pours garage floors across the city and the cities around it. Pasadena and La Crescenta-Montrose are two of the 12 areas with their own page below, and we work beyond them too.
Glendale, CA
Book a look at your garage floor
Water that gets under a cracked or sunken floor keeps working on the ground beneath it, so finding the cause early keeps the fix simpler.